_Transparent_p.png)
PC-COM
SIMPLE SUPERVISION AND CONFIGURATION SOFTWARE FOR YOUR PUMP STATION
PC-COM is a software developed for Drip Drop’s RTU’s
-
Overview process picture of pump stations.
-
Used for configuration, to load and save configurations.
-
Creates a cross-reference table for SCADA-adaptation.
-
Visualizes alarm status/ alarm acknowledge for stations.
-
Shows I/O-status for connected pump controller.
 |
|---|
 |
Settings are easily made by navigating a menu similar to the menu in each controller, PC-2000, PC-200 and PC-21. PC-COM is designed to use together with Drip Drop’s different RTU’s and pump controllers, to connect to them and view alarms, change configurations remotely, up- and download configurations remotely, and to reprogram the internal cross reference registers. Configuration can be made on-line or off-line. Connection to RTU/controller can be made by direct cable, Radio, PSTN-modem, GSM-modem or to GPRS/3G-modem. Communication protocol: COMLI, MODBUS RTU, MODBUS TCP.
The cross-reference tool in the software makes it simple to configure the controllers for different SCADA-systems on the market.
Application and function:
-
Configuration of the control system - Start-/stop levels, I/O-signals, cross-reference, alarm types.
-
Graphic process picture for pump station - Start-/run time counter, in- /outflow, pump capacity, current.
-
I/O-status and alarm status control system - Control of real signal status and active alarms.