_Transparent_p.png)
PC-200 w
PUMP CONTROLLER FOR CONTROL AND SUPERVISION OF PUMP STATIONS
-
Control and supervise up to 3 pumps.
-
Control by analogue level sensor and/or level switches.
-
Mixing function for flushing or mixing.
-
Alarm for overflow, motor protection, high level, temp.prot.
-
Alarm transmission via SMS-text with SMS-acknowledge.
-
Pulse counter for energy, flow and rain.
-
Current inputs 0-5A, for supervision of pump currents.
-
Phase supervision for incoming power L1, L2 and L3.
-
Cross-reference register for communication with SCADA.
-
RS232-port connecting of computers or external devices.
-
GSM/SMS-function for external GSM-modem.
The PC-200wis a user-friendly but powerful control unit for water and wastewater applications. All settings are made directly on the unit through simple menu navigation similar to a mobile phone, for this reason there is no need of a computer for configuration. The PC-200 is designed for water and wastewater stations with high requirements for control and supervision of pumps and pump stations. As the unit have a RS232-connection, it is possible to communicate to different SCADA systems via RADIO, PSTN, 3G, GSM or GPRS.
The cross-reference register in the unit makes it easy to adapt and connect to most common SCADA-systems on the market. Communication protocol: COMLI, MODBUS RTU/TCP.
The use of our own developed software PC-COM makes it easy to connect remotely and configure PC-200 w and create adapted cross-reference registers to communicate with SCADA systems.
Applications and functions:
-
Pump control and supervision - Control of pumps, mixer and flush valve.
-
Alarm detection and signaling - Overflow, power failure, pump failures.
-
Counter - Start-/runtime counter for pumps, overflows, etc.
-
Clear display with easy menu system - Easy to navigate and simple menu system.